Instructions

- 5 -
2.3 Items Supplied
Portable Spectrum Analyzer with detachable bench-stand/screen protector
AC power-supply/charger universal voltage, interchangeable plugs for different countries.
Spare stylus
USB lead - mini B plug to standard A plug.
Trigger input converter plug - 3.5mm jack to BNC.
Short Guide Multi-language (English, French, German, Italian and Spanish).
Full instruction manual (English only).
Support CD containing hyper-linked PDF versions of the printed manuals plus support files.
2.4 Upgrade Option U02 and Firmware Updates
Option U02 an upgrade option is available which provides a number of additional functions
including Scan Mode (high resolution data capture), Automatic Measurements, Data Logging,
Limits, Waveform Demodulation Signal Offsets, Compensation Tables, and Triggering. The
option is installed using a USB Flash drive. To check whether U02 is already installed see the
Status screens.
Option U02 is available to purchase from Aim-TTi or from your local agent/distributor.
Firmware Updates Aim-TTi may make updated versions of the instrument firmware available in
order to add new features or to correct ‘bugs’. These will be downloadable from the Aim-TTi
website without charge. The current version is displayed within the Status display. The update
is installed using a USB Flash drive.
2.5 Initial Use - Charging the Battery
As supplied, the internal battery is likely to be fully discharged. The instrument should therefore
be plugged into its charger for at least two hours before first use.
2.6 Input and Output Connections
DC Power Input 1.3mm power socket mounted on the right hand side of the instrument.
Use only the power-supply/charger provided by Aim-TTi with the unit.
RF Signal Input N type connector. Input impedance 50 Ohms.
The maximum allowable input is +25dBm or +132dBuV of RF power (4 volts rms), or 50V
DC. Higher levels could cause damage.
USB Host socket
USB Device socket
Trigger In/Out Signal Input (N type) Demodulated Audio Out
DC Power
Input