Data Sheet

Option & Accessories | Ordering Information
Brochure Part No. 82100-1490 Iss. 3
Options & Accessories
A number of options and accessories are
available. Further items may be added in future,
check the web site for up to date information.
Firmware Upgrade U02
Option U02 is a firmware upgrade that can be
purchased and installed by the user at any time.
It increases the capabilities of the PSA3605 or
PSA6005 to include those marked * on page 7
and detailed within the technical specifications.
Order code: PSA-U02
Note: Option U02 is pre-installed within the
PSA3605USC and PSA6005USC products.
Telescopic Antenna
This wideband antenna is intended for general
purpose applications where absolute
measurements of field
strength are not required.
The antenna is a high
quality unit with a
knuckle joint hinge
terminating with a BNC
connector. An N to BNC
adaptor is provided for
direct connection to the
instrument.
The length is adjustable
between 12cm and 55cm.
The useful bandwidth
is specified by the
manufacturer as 30MHz to 2GHz.
Order Code: PSA-ANT2
Note: The antenna is included within the PSA3605USC
and PSA6005USC products.
Vehicle Charger
A vehicle charger operating from either 12V
or 24V supplies is available. It is capable of
both recharging and operating the spectrum
analyzer.
Order Code : PSA-VC
Note: The charger is included within the PSA3605USC
and PSA6005USC products.
Travel Case
This soft fitted case is strongly made and offers
high impact resilience. It provides protection for
the PSA3605 or PSA6005 when in transit, and
has storage space for the power adaptor, cables,
and other accessories.
Order code: PSA-SC2
Note: The case is included within the PSA3605USC and
PSA6005USC products - see illustration below.
Connection Kit
The connection kit comprises a high quality SMA
terminated cable along with SMA to N type
adaptors for connection to the PSA and to a
generator. The cable has low losses up to 6GHz.
A BNC to N type adaptor is also included
enabling standard BNC cables to be used for
lower frequency applications.
Order Code : PSA-CK
USC versions
The PSA3605USC and PSA6005USC are
extended versions of the product that include
the firmware upgrade (U02), the travel case,
telescopic antenna and car charger.
The firmware upgrade is pre-installed and all of
the accessories, including the antenna and car
charger, are supplied within the fitted case.
Supplied Items
Standard Product
PSA3605 or PSA6005 spectrum analyzer.
Universal voltage mains adaptor/charger.
USB connection lead.
Spare stylus.
BNC converter for trigger input.
Multi-language Short Guide.
Full users manual (English only).
Support CD containing PDF versions of manuals
and support software.
USC Product
All of the ‘standard product’ items are supplied
plus the following:
Firmware Upgrade U02 (installed)
Telescopic Antenna PSA-ANT2
Vehicle Charger PSA-VC
Travel Case PSA-SC2
Designed and built in Europe by:
Thurlby Thandar Instruments Ltd.
Glebe Road, Huntingdon, Cambridgeshire. PE29 7DR United Kingdom
Tel: [phone] Fax: [phone]
Email: [e-mail] Web: www.aimtti.com
MECHANICAL
Size: 192mm high x 92mm wide x 49mm deep
(height excludes RF input connector)
Weight: 580 grms.
Tilt Stand: Built-in tilt stand for bench use which angles
the unit at 40 degrees to the horizontal.
Stylus: Casing incorporates plug-in stylus.
ENVIRONMENTAL AND SAFETY
Operating Range: +5
o
C to + 40
o
C, 20% to 80% RH.
Storage Range: -10
o
C to +50
o
C
Environmental: Indoor use at altitudes to 2000m,
Pollution Degree 2.
Electrical Safety: Complies with EN61010-1.
EMC: Complies with EN61326.