User Manual

Page 54
Signal Input
Input Connector:
SMA connector, 50 Ohms
VSWR:
1.5:1 typical
Absolute
Maximum
Input Level:
+ 20 dBm or +127 dBµV (2.2V rms) or 15V dc
12.1.10 AC Line Operation
The PSAxx02 can be operated continuously from mains power using the
AC power adaptor provided by TTi. This also recharges the internal
battery.
Input Voltage Range:
100V to 240V nominal 50Hz/60Hz. Interchangeable plus for UK, Euro,
USA and Australia are supplied.
12.1.11 Battery Operation
The PSAxx02 operates from internal rechargeable batteries. The
batteries are recharged using the AC power adaptor supplied.
Battery Type:
Li-ion 3.7V, 3Ahr nominal
Battery Life:
> 8 hours continuous operation
Recharge Time:
< 3 hours from fully discharged
Auto-Sleep Mode:
To conserve battery life, the system can be set to automatically switch
into sleep mode after a defined time from the last key press. This can
be set between 5 mins and 60 mins (or never).
12.1.12 Mechanical
Size:
192 x 92 x 49mm (7.5 x 3.6 x 1.9”) plus 3mm projection of SMA
connector
Weight:
560 grms (1lb 4oz).
Tilt Stand:
Built-in tilt stand for bench use which angles the unit at approximately
40 degrees to the horizontal.
Screen Protector
For portable use, the tilt stand can be moved from the rear of the
instrument to the front where it acts as a screen protector and sun
shield.
12.1.13 Environmental and Safety
Operating Range:
+5
o
C to + 40
o
C, 20% to 80% RH.
Storage Range:
-10
o
C to +50
o
C
Environmental:
Indoor use at altitudes to 2000m, Pollution Degree 2.
Electrical Safety:
Complies with EN61010-1.
EMC:
Complies with EN61326.