Brochure

Vehicle Charger
A vehicle charger operating from either 12V
or 24V supplies is available. It is capable of
both recharging and operating the spectrum
analyzer.
Order Code : PSA-VC
Note: The charger is included within the PSA1302USC
and PSA2702USC products.
Travel Case
This soft fitted case is strongly made and offers
high impact resilience. It provides protection for
the PSA1302 or PSA2702 when in transit, and
has storage space for the power adaptor, cables,
and other accessories.
Order code: PSA2-SC
Note: The case is included within the PSA1302USC and
PSA2702USC products - see illustration below.
USC versions
The PSA1302USC and PSA2702USC are
extended versions of the product that include
the firmware upgrade (U01), the travel case,
telescopic antenna and car charger.
The firmware upgrade is pre-installed and all of
the accessories, including the antenna and car
charger, are supplied within the fitted case.
Product Applications
Traditional RF Field Measurements
The PSA Series II will find many applications
within traditional radio communication field
environments such as:
Antenna Alignment
Signal Strength Mapping
Interference Analysis
Covert Transmitter Detection
Spurious Emissions
EMC Evaluations
The wide span of the PSA Series II makes it
suitable for investigation of equipment emissions
for compliance with EMC requirements relating
to CE or FCC approvals.
Emission Frequency Evaluations
Comparative Emission Measurements
Product Development & Servicing
The PSA Series II is as suited to bench-top RF
work as to field work. Typical uses include:
RF Amplifier Block Design
Oscillator and Mixer Design
Power Measurements
Impedance Matching Measurement
IF Section Alignment












RFID Measurements
Site Evaluations
Transmitted Power Measurements
Frequency Domain Evaluation
The low cost of the PSA Series II provides every
engineer with the potential to own a spectrum
analyzer, whether they work in the RF field or
not.
Observing signals in the frequency domain often
provides information that can not be seen by
looking in the time domain using an oscilloscope.
Typical uses include:
Harmonic Distortion Measurement
Filter Evaluations
Clock Signal Integrity Checks
Spurious Signal Identification
HF Stability Analysis







Signal Input (SMA)
USB Host socket
USB Device socket
Trigger In/Out
Demodulated Audio Out
DC Power
Input

Context Help is instantly
available for each menu
function from Status/Help.
The complete status of the
instrument can be read using
the Status key.
Standard Product
PSA1302 or PSA2702 spectrum
analyzer.
Universal voltage mains adaptor/
charger.
USB connection lead.
Spare stylus.
BNC converter for trigger input.
Multi-language Short Guide.
Full users manual (English only).
Support CD containing PDF versions
of manuals and support software.
USC Product
All of the ‘standard product’ items
are supplied plus the following:
Firmware Upgrade U01 (installed)
Telescopic Antenna WB-ANT
Vehicle Charger PSA-VC
Travel Case PSA2-SC
Supplied Items