Datasheet

View and adjust setting
limits at any time.
S-Lock digitally locks volt-
age and current settings at
the touch of a button.
Low current range gives
0.1mA meter resolution and
finer low current setting.
Meter averaging reduces the
jitter from rapidly varying
load currents.
V-Span enables the full
300
o
rotation of the voltage
control to cover any volt-
age range.
DC output switch enables
voltage and current to be
set up before connecting the
load.
Voltage sensing can be
changed between local
and remote at the flick of a
switch.
True analog controls make
adjustment quick and simple.
Safety binding post termi-
nals can accept fixed-shroud
4mm plugs** as well as
normal plugs, bare wires,
and fork connectors.
The New PL series achieves an exceptional power density for a linear
regulated power supply by offering up to 90 watts from a ¼ rack 3U
sized casing.
This gives it an unusually small bench footprint taking up less space
on a crowded bench.
For rack-mount application, up to four units can be mounted into a
single slot.
Despite its small size and linear regulation, the New PL series generates
relatively little heat through the use of an advanced phase controlled pre-
regulator.
This gives it significantly higher energy efficiency than conventional linear
regulated designs, particularly when supplying lower voltages.
The internal heat-sinks use fan-assisted convection cooling in order to remove
the heat with minimal fan noise.
High accuracy four digit
meters have a fixed resolu-
tion for consistent readings
at-a-glance.
Actual size
Ultra-compact design with higher power efficiency and near-silent cooling
Better performance ....
Linear regulation:
ultra-low output noise and fast transient recovery
High power density:
90 watts per output from an ultra-compact case size
Higher precision:
exceptional line and load regulation;
easy-switch remote sense
Better metering:
high accuracy four digit fixed-resolution meters;
low current range; current meter averaging




.... with real ease of use
True analog controls:
quick and intuitive adjustment of voltage and current
With digital convenience:
unique S-Lock and V-Span functions (see opposite)
See exactly what’s happening:
dc output switch - check your settings before applying them;
‘view settings’ button - check and adjust limits at any time
Safe and secure to use:
lockable voltage and current settings (using S-Lock);
connect via safety binding-post terminals




New PL series - ultra compact using minimum bench or rack space