User Manual

Display
Display Type: Dual 5-digit 0·56” LEDs with range and function indication.
Maximum display count 50,000.
Display Functions: Simultaneous display of R + Q, L + Q, C + D, or C + R in normal
measurement modes.
Prompts to change frequency or mode to improve accuracy.
Simultaneous display of Pass/Fail status with Bin No. in Sort mode.
Inputs
Component Connection: 4-terminal connection for both radial and axial devices.
Maximum Voltage on
Component: 0·3Vrms.
Bias Voltage: Switchable 2V polarising voltage for measuring electrolytic capacitors.
Input Protection: The instrument has been designed to withstand direct connection of
capacitors charged up to 50V DC with up to 1 Joule ( ½ CV
2
) of stored
energy.
Interfaces
RS232: Serial link to PC permitting range/function control, limits setting and
results data-logging on the PC.
General
Keyboard: Full numeric keyboard for entry of limits data.
Non-Volatile Memory: Up to 9 complete set ups stored in non-volatile memory.
Power: 220V-240V AC or 110V-120V AC ±10%, 50/60Hz, adjustable internally;
25VA max. Installation Category II.
Operating Range: +5ºC to 40ºC, 20-80% RH.
Storage Range: –40ºC to 70ºC.
Environmental: Indoor use at altitudes up to 2000m, Pollution Degree 2.
Safety: Complies with EN61010-1.
EMC: Complies with EN61326.
Size: 365 x 240 x 95 mm, including feet.
Weight: 2.9 kg.
Options: Remote 4–terminal measurement interface.
4–terminal surface mount tweezers.
Kelvin Clip set.
PC logging software.
4