User Manual

Swing function
The electric heater in operation mode, press the "swing" key to open the swing
function, pressing this button to turn off the swing function; when the electric heater
stops heating function, the wind swinging function also stop.
Temperature sensor short circuit, open circuit protection function
No matter in what mode, the temperature sensor appears short circuit or open circuit,
digital screen displays "E1" or "E2" and constantly flicker, while any key operation is
invalid and the buzzer rings 10 times.
Safety protection
In the start state, when the room temperature TH is above 122
°F , close all outputs
system, The digital screen displays "FF" and flashes 1 time per second at a
frequency of 75 times, press any key will not work, only the power down to exit the
protection.
ECO energy saving function
Select the ECO energy saving gear, electric heater according to the ambient
temperature and the temperature setting of the machine to do comparison, select the
appropriate gear operation to achieve the purpose of saving energy.
Remote controller
Use of the remote controller: the key functions are basically the same as the body
operation panel.
Remote control
Timer button
Mode button
ON/OFF button
Temperature / Timer increase
Temperature / Timer decrease
BATTERIES INSTRUCTIONS (included)
Swing button
1. Please push locking latch in the direction of Arrow A, and pull out the pull notch in the direction
of Arrow B at the same time.
2. Use 1 "CR2032" lithium battery (included)
3. Insert the batteries, making sure that the positive terminals are facing the proper way.
4. Replace the cover.