User`s manual

Footswitch:

This jack allows connection of any standard footswitch to remotely turn on the reverb on

and off.

Bias Test Jacks:

Three standard tip jacks are available to allow easy bias current measurements without

removing the chassis. Refer to the section on biasing for instructions on the use of these

jacks.

Bias:

A locking mil-style RV6 trimpot is provided to allow adjustment of bias current. The outer

locknut must be loosened before adjusting the screwdriver-slot control. Refer to the

section on biasing for further instructions.

InvaderMKIIManual.doc 12/08/11 Page 9 of 17