Specifications

22
Function & Operation
GPS Test
It is to check some data, such as the strength of receiving signal, and
the numbers of satellites.
Operating method:
All information in this interface are instant information. For details, please
refer to those of the device.
GPS reset:
There will be different satellites in different places correspondingly
when the GPS navigation equipment is receiving the geosynchronous
satellite signal. This is called “Ephemeris”. An ephemeris covers a
range of 300KM. When you have set the “Ephemeris” in place A and
shut down the equipment to take it beyond 300KM, the equipment will
be in another ephemeris, and start searching for the satellite to
ascertain the ephemeris. This may cost a lot of time. Clicking "Reset"
button before searching would save much time.
In the system UI, click the icon to open workbox, then find the
icon and click it to entry the function of GPS Testing.
It will display as follows:
Orange Electronic Co., Ltd.