Please read this manual before you start using this device Thanks for purchasing our product. Please read this manual carefully before starting to use this device. When you use this device, you are supposed to learn well of this product. The information in this manual has been verified for its accuracy.
Catalog General tips for GPS application Function Description Features------------------------------------------------------------------------------------------------------------- 4 Warnings------------------------------------------------------------------------------------------------------------- 5 Illustrations on screen display---------------------------------------------------------------------------------- 6 Battery Battery Status Icon -----------------------------------------------------------------
General tips for GPS application The following content is tips for GPS device application and operation. Please read it before starting use of the GPS device, so that you may make a better use of the GPS device. While the GPS device is working, it receives sig n al from satellites for positioning. The signal from satellite may not be received, or be weakened in room, nearby some big buildings, or under overhead bridges.
Function Description Features: Ultra large, high-definition, and true color display, touch screen operations with handwriting input. Professional portable navigation system, interface design of car electronic products, changeable theme interface, and convenient operations.
Function Description Warnings: Please install the device in a right way to avoid driver's sight and airbag to be hindered. Any loss or damage of product, passengers, or other property caused by mistakes of mounting or installing of the device will be not covered within the warranty and not be the responsibility of the manufacturer. Please not put on earphone and operate the device when you drive or ride a bike to ensure your safety.
Function Description Illustrations on screen display: System UI 00:00 Under this UI, click icon down the screen to enter the function page. Then there will be Looped playback of cartoon, click it to entry this function. If you click the icons beside the function icon you can enjoy the cartoons. If you click the arrow up the corner you can turn pages to view, which accompanies the cartoon at the same time.
Battery Battery Status Icon: Full Drained When the battery is at low power level, please charge it immediately to ensure the device work normally Charging: Warnings for charging: 1. A new battery may be empty and not charged before you get the device. 2. To achieve the best performance of the battery, it is better to charge it up to 8 hours in the first three times, but not over 16 hours. 3. In normal charging with DC charger, please make sure to charge it for 2 – 2.5 hours to get it fully charged.
Battery Charger Application: Car Lighter Charger: Please insert the car charger into car cigarette lighter jack, then plug into the USB jack(see the illustration below). Inserting into car cigarette lighter jack USB jack When you use car charger, please start car engine first, then connect it to the device to avoid possible damage to the device due to overloaded pulse current during ignition. Please pull it out when you stop the engine, and plug it in again after next ignition.
Function & Operation Power On the device In power off status, slide the power switch to "ON" position to turn on the device, then the OSD will be displayed on screen. Sleeping & Power –off In power-on mode, press the power button on the device for 3-5 seconds then the sleeping mode or confirmation for power-off screen will display as follows: In this UI click the button will be in sleeping mode, click the button will power off ; click the button to exit the UI and back to normal operation.
Function & Operation FLASH Play This is for Flash file playing. Operation: In the system UI, click the icon to entry the function of Media player, then click the "Flash" to enter into the Video Player. And the screen will display as follows: on this UI, click click button to search Flash files not in selected folder; button to close this window and exit Flash palying mode; double click, or select then click button to open the selected file. 10 Orange Electronic Co., Ltd.
Function & Operation Control buttons in playing mode: :Play, in Pause or Stop mode, press this button to play; :Pause, in Play mode, pressing this button to pause; :Stop, in Play mode, pressing this button to stop; :Fast Forward, in Play mode, pressing this button to get fast forward once; :Fast Retreat, in Play mode, pressing this button to fast retreat once; :Full Screen, pressing this button for full screen paly; :Return, pressing this button to return back to system main menu from playing mode; : Sound
Function & Operation Music Playback This is for Music Playback with format of MP3, WMA, WAV. Operation： In the system UI, click the icon to entry the function of Media player, then click the "Music" to enter into the Video Player. And the screen will display as follows: On this UI, click button to search for music files not in selected folder; click button to close this window and exit musi play mode; double click, or select then click button to play this music file.
Function & Operation Button and control in Play Mode: In music play mode, click Button button to pause, then it becomes Play ; At this time click return again; click the next one,click button, music play mode will button to stop; click button to jump to the previous one;click button to switch Repeat mode; click button will become button to jump to , click button to set mute, then this again to recover. Exit from Music play Click button at the upper right corner to exit.
Function & Operation Video Playback This feature is for video file playing, with the formats: AVI, MPEG, MPG, ASX, DAT,ASF and WMV. Operation: In the system UI, click the icon to entry the function of Media player, then click the "Video" to enter into the Video Player.
Function & Operation UI and button definition: Play Next Pause Previous Stop Full screen display Close Play Progression, drag to a point to start play Volume tune, click anterior to set into mute status, click it again to resume, click again to recover. In full screen display, the tool bar at screen bottom will be hidden, you can slightly tap on screen to get it. It will take a few minutes to search fies when video play mode starts if this application has not been used for a long time.
Function & Operation Photo Display This is for Photo Display with format JPG stored in an SD card. Operation: In the system UI, click the icon to entry the function of Media player, then click the "Picture" to enter into the Video Player. And the screen will display as follows: On this UI, click button to search photo files not listed in the appointed photo file folder; click button to close current UI and exit Photo Display function; double click or select then click button to open or play this file.
Function & Operation Operation under photo view Then, click or button to select previous or next photos; click or button to zoom in or zoom out photo; click button for full screen display. In full screen display, tap the screen again to exit full screen display; click button to select display of different percentage;Click the button you can Ctrl-Shift-R or Ctrl-R the photo. is for selecting to set automatic or manual mode to turn page of display.
Function & Operation eBook Reading This if for eBook Reading with format .txt stored in an SD card. Operation: On system main menu, click button to enter into eBook Reading application. Display of UI for file selection: E-Book On this menu, click button to search for txt files not in selected folder; click button to close this window and exit file reading mode; double click button, or select then click button to open this file.
Function & Operation Bookmark This is for bookmark in reading a voluminous article, marking or jumping to the last time marked page, a humanized design for convenience while reading. Operation: In eBook Reading mode, click right button to enter into bookmark setting, display of dialogueblock is shown as in the illustration below: click button, a bookmark will be saved for current page.
Function & Operation Game On system main menu, click icon to enter into Game. Screen display is shown as the illustration below: In this state, click the game icon on the screen to enter the game. For details on how to play the game, see the help information that will be available after you enter the game. 20 Orange Electronic Co., Ltd.
Function & Operation Calculator This device has two calculators: Ordinary and Scientific calculator, able to be switched at any time, a good assistant for your work and study. Operation: In the system UI, click the icon to open Tools, then find the icon and click it to activate the function of Calculator. As shown in the above illustration, the calculators can be used like normal others.
Function & Operation GPS Test It is to check some data, such as the strength of receiving signal, and the numbers of satellites. Operating method: In the system UI, click the icon to open workbox, then find the icon and click it to entry the function of GPS Testing. It will display as follows: All information in this interface are instant information. For details, please refer to those of the device.
Function & Operation TPMS function Set TPMS details, please refer to the P412 manual GPS System Homepage GPS System Homepage: Homepage displays 2 icons GPS and TPMS functions. These are one touch icon function keys PRESS “Orange TPMS” tire icon on the screen to enter TPMS function system. High/Low Pressure Alert Tire Pressure alert with both visual and audible alarm.
Function & Operation System Setting This is for system setting to change default setting of the system to your personal preference. Operation: On system main menu, click icon to enter into system setting. Screen display is shown as the illustration below: Language Backlight Power Time System Co.adjust Sound In system setting, there 9 items for setting, click directly each item to change setting for it. Details will be described one by one below.
Function & Operation Backlight setting This is for changing backlight brightness of the device screen display, and time to start screen saver when no operation on the device. Screen display is shown as the illustration below: Then, drag the slide block to set. Select No Screen Saver, then the screen saver will be disabled. After setting, close the current window to save.
Function & Operation Sound Setting This function is for setting start-up music, clicking volume and the whole volume. After entering the screen shows like below: Click “Screen sound” in this interface to enable or disable the sound of screen operations, “Open TTS” is to enable the speech broadcasting function. TTS speech engine gives a clear broadcasting of the function name every time you enter into a function. English and Chinese speeches are supported for the moment.
Function & Operation Time Setting This is for setting time of the system. After entering into this UI, screen display is shown as the illustration below: On this UI, click button on the screen to set. After setting, close the current window to save. System Resources This is for checking system resources: Open GPS record On this UI, click directly at the item on the right to check. 27 Orange Electronic Co., Ltd.
Function & Operation Coordinates Calibration This is for calibrating the stylus coordinates on touch screen. After entering into this UI, screen display is shown as the illustration below: Please point the image’s center area correctly On this UI, use stylus to tap at the center of the cross, then tap on other crosses which will move after each tapping until finish and “Touch Screen Calibration Completed” is shown. Update Logo The function is for updating start-up logo of the device.
Function & Operation Then click button to cancel upgrade, or click with the upgrade processing. to proceed Warning: please be sure that the battery is being full when you are updating. If not, please get the device charged. GPS Path Using this function is to set GPS path for your navigation. Screen display will show as follows: Back GPSpath Files listed on the present screen belong to the saved ones in SD card, so click them can read the file.
Function & Operation (which has different names from each different company, please refer to details from each company of these navigation software. e.g. Careland has WINCE_GPS.exe), then select and click button, a dialogue frame will pop up on screen, as it shown below: Then click "Cancel" button to abort; click "Cornfirm" to accept, then display on screen will be: Click button on the upper right corner to return to GPS path UI. 30 Orange Electronic Co., Ltd.
Function & Operation USB This is to set the mode when the USB interface of the device is connected to the computer, in which “U disk” is to set the device as the portable memory, and “ACTIVESYNC” is to use the device for program debug. Pictures are shown as below: Click the desired connection mode and close the window to save the chosen mode. Plug the orther end of the Cable into the mechine Plug one end of the USB Cable into Computer 31 Orange Electronic Co., Ltd.
Services Returning to Win CE Desktop The device can return to the Win CE by pressing one key and implement the PDA functions. Operation Procedure: On the system main interface, click the icon and the screen pops up the confirmation dialog box. Click OK to return to the Win CE desktop. At this time, you can perform relevant operations. Return to the navigation system from the Win CE desktop: On the Win CE desktop, click the system. 32 icon to start the navigation Orange Electronic Co., Ltd.
Services How to save and allocate files in TF card: Usually, the files used by the device are saved in the appointed folders to ensure the access for embedded program of the device. You may save files into other folders or under root directory of the TF card.
Services Specifications CPU SiRF Atlas 5 Memory 2GB GPS Chip SiRF 3i+ Antenna Built-in antenna Memory Card Applicable for a Maximum up to 32GB SD card Screen Type TFT Touch Screen Screen Size 5.0" Screen Color 262K colors Dot Matrix Display 480*272 Extension Slot SD Battery Type Li - polymer battery Battery Capacity 1200 mAh 34 Orange Electronic Co., Ltd.
Services Trouble Shooter No. Fault Possible Cause Solutions No power on Battery drained (The screen has no further display after a blink when pressing power on button.) Please refer to the description of battery charging in this manual, only use the enclosed charger to charge the device. The start interface stays on the screen for long time without changing. Dead Unit No display of the screen, or display on screen is frozen as any button is pressed.
