-1- aigo F155 MP3 PLAYER USER’S MANUAL Thank you for purchasing aigo F155 MP3 Player! Please read all instructions in this User’s Manual before using the player. The contents are subject to change without any prior notice. Copyright Huaqi Information & Digital Technology Co., Ltd 2005 TABLE OF CONTENTS Summary 1. Features 2. Warnings 3. Accessories 4. Player overview and function Basic Functions 1. Power on /play /pause 2. Power off 3. Voice 4. forward/backward(fast forward/fast backward) 5.
-2- 5. Firmware upgrade and format memory 6. Firmware 7. Uninstall MP3 management 8. Driver upgradeable and service Other 1. Troubleshooting 2. FAQ 3. Specifications 1 -1.
-3l To avoid damaging the unit, we strongly advise you to use Alkaline batteries. * To avoid hurting your ears while listening, please adjust the volume properly. 1-3 . Packing list This player includes the following accessories; please contact local venders if anything is missing in the package. 1. MP3 Player Unit 1pcs 2. Earphone 1pcs 3. USB Connection Cable 1pcs 4. Driver Disk 1pcs 5. AAA Battery 1pcs 6. Neck strap for carrying 1pcs 7.
-4- The power will be turned on when PLAY/PAUSE button is pressed. aigo logo with blue backlight will appear; the player will automatically resume playing music. Note: The Resume Function will be deactivated by adjusting setting 6-8. total tracks repeat mode current track A-B repeat play/pause EQ display track name/lyric key lock Battery indicator playing time Volume level Songs/lyrics display The music title will appear prior to ID3/TAG if the music files includes ID3/TAG messages.
-5- Press Fast Forward/next to select next track or press it to fast backward the music 5. A-B Repeat/ adjust EQ Segment repeat function (A-B) is available during playing by pressing the A-B button at the start position and by pressing it again at the end position, the segment will be played repeatedly; Press the A-B/EQ/REC button to delete the section repeat. Press the A-B/EQ/REC button to adjust EQ. The EQ modes includes NORMAL/ROCK/JAZZ/CLASSIC/POP/USER 6.
-6- 7. Key Lock Push the Hold switch leftwards, it will be in lock mode. There will be an icon displaying on LCD screen. Move the switch right, it will unlock the player, and icon will disappear. If you try to turn on the player when it’s locked, the LCD will display prompt message; you must unlock it before turning it on. 3- 1. Main Menu Press Fast Backward / Forward to select item in the menu Press Mode Button to enter, press and hold the button to exit.
-7- Press Mode to stop recording and it will be in play recording mode. Note: The recorded files will be automatically named as V001.WAV/V002.WAV…. 3- 3 Stop Watch Press Fast Backward/Next to start stopwatch timer. Press Fast Backward/Previous to stop timer; press it again to restart stopwatch timer. Press Fast Backward/ Fast Forward to choose a file, then press A-B to confirm. The closed folder icon will turn into an open folder icon （ → ）.
-8- 6-8 setting EQ USER EQ Play mode Contrast Backlight Shutdown Sleep off Language Sample rate Resume Lyrics synchronous LOGO Software Version Hardware Version Disk check Exit 1) EQ You can select different EQ modes according to the music. This function is detailed above in the corresponding section. 2) User EQ There are 5 frequency points in User EQ: 80Hz/ 250Hz/ 1Hz/ 4Hz/ 12Hz. Press Fast Backward/ Fast Forward until you reach the frequency you want to adjust, then press the Mode button to confirm.
-9- * Note: 1. The player will not shut down while it is in file management and recording state 7) Sleep off mode There are 7 different modes: 1min, 2min, 5min, 10min, 30min, 60min and disabled. The player will be turned off automatically after the defined period of time. 8) Language The language for the ID3 display can be chosen between English or other languages available. 9) Sampling Rate You can adjust the sampling rate for microphone recording and.
- 10 - 3- 8 Return Press the Mode Button in order to return directly to the status of Music, voice you last left. 4- 1. System requirements Microsoft ® WindowsTM 98 SE/Me/2000/XP Microsoft ® Internet Explorer 4.0 or higher Pentium® 100MHz or faster CD-ROM drive USB port 20MB available hard disk space 2. Installation of Manager Software Before installing, please close the application programs on your computer. You should click the “Next” button on the screens or change the selection until it is finished.
- 11 - While the files are being transmitted, the message “Writing” will be displayed on the LCD display. Please avoid to disconnect the player during the process. After transmission is completed, please close My Computer or Files Management program. If your system is WINME, WIN2000 or WINXP, you can operate as following: Click the green arrow on the right side in below. Click “Stop USB Disk-Driver” Pull out the USB cable after “Safely To remove hardware” has turned up.
- 12 - Click the Start button to let begin the upgrade. If you select Format files, click Start: The hardware begins to upgrade, and the files are being formatted simultaneously. Please copy all the files important to you before formatting. Caution: Please do not use the Windows formatting program. 4-6 Firmware Recover If there should occur some error in the functioning of the player, please do the following: 1) Shut down the player.
- 13 - 4) Firmware If your operating system is WIN XP, the system will detect the player as a new hardware. If you want to install Sigmatel MSCNSM Audio, please do so according to the steps described above for the Player Recover Device software. 5) Disconnect the USB cable. 6) The above steps executed, the player will recover normally. 4- 7 Uninstall MP3 Manager in the Aigo Manager program group, choose Confirm in the dialog box. Run The manager software will automatically be deleted.
- 14 - reliable. 5-1 Trouble Shooting * The LCD display shows nothing after the player has been turned on. Check if the battery has been inserted. Check if the battery needs to be replaced. Try to reinsert the battery or replace it. Take out the battery and insert it correctly after 5 seconds. * There is no sound while MP3 files are being played. Check if the volume is too low and turn it up. Check if there is any music file in the memory. * You cannot download music files.
- 15 - Model Name Built-in Memory Battery and Life Earphone Output Placing Frequency Range S/N Communication Interface aigo MP3 F155 128M/256M/512M/1G Flash Memory 1 Size AAA Battery for 10Hours or More Max.
