Specifications

20
Chapter 8 troubleshooting
3. Make sure the correct power supply is plugged into
the Amigo. (see page 7, item 12)
4. Press the power button for more than 1 second and
the Amigo should turn on.
Images are too dark:
If a picture is present on the display but excessively dim
while using Color mode, check the lights under the unit
underbody. A bright, white light should clearly be visible. If
no bright light is visible underneath, your unit may require
service. Please contact Enhanced Vision technical support.
Images are blurry/distorted:
1. This is usually caused by finger prints or dirt on the
glass underneath the unit. Make sure the glass is
cleaned with a lens cleaning cloth. Use the cleaning
cloth or a cotton swab only when needed.
2. Hold or place Amigo directly on the target material
that is to be read. Amigo is designed to be in focus
when positioned on the target material.
3. If using the Writing Stand, some level of blurriness is
unavoidable. Only use the writing stand for
applications requiring your handwriting and at
minimum magnification. Resume normal use without
the writing stand whenever possible.
TROUBLESHOOTING