User's Manual

12
5.3.1 Add a camera
1. Select an ID number for your new camera and move the cursor to
this camera ID number by pressing up/down arrow key.
2. Press left/right arrow key and select 'Pair' option.
3. Press 'Enter' key to perform pairing process.
4. Press and hold the 'Pair' button at the back of camera unit for 1 second.
The power LED of camera unit will blink to indicate pairing mode.
5. Pairing process will be started automatically. Upon pairing success,
the screen will display a message to indicate if the pairing process is
completed.
6. If unsuccessful, delete the pairing and retry above process.
5.3.2 Auto scan
Auto scan function automatically cycles through all registered cameras
and display each camera for 10 seconds. If only one camera is registered,
the screen will only display video from the registered camera.
Note : When auto scan is enabled, VOX and auto mute functions will
be disabled temporarily until auto scan is disabled.