Viscount Raised Toilet Seat VR224C,D,E,F,G,H Usage and Maintenance Instructions EN
INTRODUCTION Thank you for purchasing the Viscount Raised Toilet Seat from Aidapt. BEFORE USE • Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may damage the surface of the product. • Check the product for any visible damage. If you see any damage or suspect a fault, do not use your product, but contact your supplier for support.
fig.1 3 – Unscrew the hand wheels of the raised toilet seat (see fig. 1). fig.2 fig.3 4 – Carefully place the seat onto the toilet bowl (see fig. 2). Position the raised toilet seat correctly on the rim of the toilet ensuring the front lip is outside the bowl. (see fig. 3). To tighten, turn the hand wheels clockwise to tighten. 5 – Check the stability before use. 6 – To remove, simply unscrew the hand wheels and remove the raised toilet seat by lifting up.
If in any doubt, please do not issue or use, but immediately contact your supplier for service support. IMPORTANT INFORMATION The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or other commitment by Aidapt Bathrooms Limited or its agents or its subsidiaries and no warranty or representation concerning the information is given.
