Instruction Manual

INTRODUCTION

Thank you for purchasing the forearm rollator from Aidapt.

These instructions should be read carefully and left with the user of the product for future reference.

Please ensure this equipment is installed by a competent person.

VP197F – Forearm Rollator 136kg (21St) Max Load

Do not exceed the weight limit stated – doing so could put you at risk.

INTENDED USE

The rollator is suitable for use on level floors inside and outside the house, for users who require a stable

support of the upper limbs and hands. A seat and detachable bag are included Do not use or combine bags

or baskets from other manufacturers. In normal use, you can easily fold your rollator and store away until

required. Please ensure fingers are clear of the locking mechanism to reduce the risk of entrapment when

closing our rollator.

FEATURES

 User friendly brakes lever with lock

 Simple brake cable adjustment

 Soft plastic solid wheels

 Swivelling front wheel

 Folding locking mechanism

 User friendly height adjustment

 Ergonomic hand grips to reduce pressure

 Includes a bag

 Forearm supports

ASSEMBLY INSTRUCTIONS

1. Remove the walker from the box and examine

the product for any visible signs of damage

before using/installing. If you see any damage

or suspect a fault, please do not use and

contact your supplier.

2. Raise the handles into the upright position

(Figures 2-3).

3. Lock the frame on both sides by

bringing the folding lock lever up

180° so it points upwards (Figure 4-

5).

4. Rotate the folding lever so it locks

into the plastic clip (Figure 6).

Note, the folding lever will only lock

into the plastic clip if the folding

lever is in the correct position.