Operation Manual

Step 1:
Install front wheel into
receptacle located on the
front of the frame whilst
pressing the locking pin (see
fig. 1) The locking pin will
pop up when the wheel is
securely in place (see fig.
2) Repeat step 1 to attach
second front wheel.
Step 2:
Install rear wheel into
receptacle located on the
rear of the frame whilst
pressing the locking pin (see
fig. 3) The locking pin will
pop up when the wheel is
securely in place (see fig.
4) Repeat step 2 to attach
second rear wheel.
When attaching the rear wheels make sure that the wheels are on the outside
of the frame.
Step 3:
Attach the handles by depressing the locking pin on the
base of the handle assembly and sliding into the
recaptacle on the main frame. Repeat on the other side.
When attaching the handle assembly make sure that
the handle is facing towards the rear wheels. The
ergonomic fin on the handgrip should be facing in.
Adjust the height level of the handles to suit different
users. Press the locking pin on the main frame and pull
the handgrip upwards or downwards. As the handle
moves, release the buttons. This automatically locks in
the next possible height. Repeat this process until the
desired height is reached. Make sure both handles are
locked at the same level (see fig. 5)
ASSEMBLY INSTRUCTIONS (continued)
fig. 1
fig. 3
fig. 2
fig. 4
fig. 5