Instruction Manual

6. Attach the L shaped tubes using four C-shaped brackets and eight screws. (see g.11) Ensure that
the two C-shaped brackets nearer the edge of table are between the two rivets (see g. 12). Do not
overtighten as this may cause damage to the table.
7. Insert the free ends of L shaped tubes into the H Frame (see g. 13). You may require assistance
to align them correctly. Slowly lower the table top (see g. 13). Ensure you lower both sides at the
same time to prevent binding.
8. Loosely attach two thumbwheels to the small spigots at top of H frame (see g. 14).
ASSEMBLY INSTRUCTIONS CONTINUED
C Bracket MUST be
in between the
two rivets
(g. 12)(g. 11)
(g. 13)
(g. 14)