Instruction Manual

(g. 2)
ASSEMBLY INSTRUCTIONS
Please examine your product for any visible
damage before using/installing. If you see any
damage or suspect a fault, please do not use, but
contact your supplier.
1. Carefully remove all packaging and ensure
all loose tments have been provided. (g. 1)
2. If you have purchased the VG832B (with
castors) follow this step, otherwise move
on to step 3. Locate the pre-punched
castor holes on the base frame (g. 2), align
the castor and screw in with spanner (J)
provided (see g.3). Ensure castors are fully
tightened.
3. Turn the U frame over so that the spigots are facing up. Lower the H frame onto the spigots of U
frame (see g. 4). Ensure the black plastic collars on the H frame are at the top and the spigots on H
frame are facing outwards (see g. 5).
(g. 3)
(g. 4)
(g. 5)