Operation Manual

Assembly and Operating Instructions Ver. 3 01/2014 (2284)
4
ASSEMBLY
1. First remove all contents from the box.
2. To open the chair, push seat rails and press downwards until the chair
is fully opened taking care to keep fingers clear of moving parts
(Fig.1).
3. To close the chair, take the centre of the seat fabric at the front and
back edges and lift (Fig.2).
Fig. 1 Fig. 2
NB: When opening and closing your chair please keep fingers well away
from any possible entrapment areas.
The only part of the chair that can be adjusted are the leg rests. Ideally your
knees should be at 90 degrees with the seat. If you are not sure please
contact a healthcare professional or your local chair dealer for advice.
BRAKE OPERATION
Parking Brakes (Occupant)
See Fig. 3 which shows the chair with the parking brake not applied. To apply
the parking brake push the handle forward as in Fig. 4 until it ‘clicks’ and this
will apply the brake.
Fig. 3 Fig. 4