Operation Manual

Assembly and Operating Instructions Ver. 4 01/14 (2286)

BRAKE OPERATION

Parking Brakes (Occupant)

See Fig. 7 which shows the wheelchair with the parking brake not applied. To apply

the parking brake push the handle forward as in Fig. 7a until it ‘clicks’ and this will

apply the brake.

Fig. 7 Fig. 7a

BRAKE ADJUSTMENT

To adjust the brakes, release the two hex nuts with an alan key and slide the brake

unit forwards/backwards. When the brake is adjusted as required re-tighten the hex

nuts. See Fig. 7b.

Fig. 7b

nuts