User Guide

6
Connection: Using RS-232
VISCA IN/OUT
When connecting through RS-232 connection.
RS-232C DIN 8 cable Pin Assignment
1. Use VISCA 8-pin Din cable to connect CCS-USB to 232 Input.
2. Use VISCA RS-232C out on the camera to connect to RS-232C
in on the next camera. Daisy-chaining is up to 7 cameras.
3. When using third party cameras, make sure the pin layout before
running the RS-232C cable
1. If you are using PTZ3-X20L, follow the cable pin assign shown in the table.
2. If you are using another cameras with RS-232, be sure to check the pin
assignment. You may need to customize the cable.
RS-232C Din 8 Cable
Continue on Next Page
1. DTR
2. DSR
3. TXD
4. GND
5. RAD
6. GND
7. NOT USED
8. NOT USED
1. DTR
2. DSR
3. TXD
4. GND
5. RAD
6. GND
7. NOT USED
8. NOT USED