Application Guide

1. Set the emergency brake.

2. Remove the (2) 9/32 screws from above the instrument gauges.

3. Lower the steering column all the way down.

4. Carefully pry outward on the dash trim bezel.

5. Disconnect the wire harnesses from the headlamp switches and the climate controls

and remove the panel.

6. Remove the (2) 9/32 screws securing the factory radio to the sub-dash.

7. Pull the radio forward, disconnect the wire harnesses and antenna lead

and remove radio.

(Mounting Tabs)

NOTE: Position mounting holes on kit to the

bottom for 2003-06 Expedition application.

2003-06 Expedition

1. This kit may be mounted in vehicle dash with pocket on top or bottom.

2. For all ISO Mount applications, you must use the factory style rear support bracket.

3. Remove the Mustang mounting tabs for these applications.

Remove Tabs

Spacer Nubs

* See Notes on Page 1

DASH DISASSEMBLY:

003-06 Ford Expedition w/out Factory Navigation

NOTES:

997-08 Ford Econoline Van

(Club Wagon)

2000-05 Ford Excursion

2004 Ford F-150 Heritage

1999-03 Ford F-Series

(All)

1995-11 Ford Ranger

1999-03 Ford Windstar

1995-10 Mazda B-Series P/U

5 6

(Mounting Spacers)

1. Pocket must be on top.

2. Attach mounting spacers to backside of mounting tabs (if desired).

3. Attach a backstrap from the back of the pocket to the backstrap hole on your radio.