Application Guide

1. Pocket must be on top for all vehicle applications.

2. You cannot ISO mount on these applications.

3. You must use the Din mounting sleeves on these applications.

4. Remove the Mustang mounting tabs for these applications.

Spacer Nubs

* See Notes on Page 1

Remove Tabs

1. This kit only fits Cougar vehicles with a flat face Ford radio, not the curved type

(i.e. Ford Focus style).

2. Remove the Mustang mounting tabs for this application.

1. Pocket can be mounted on the top or the bottom.

2. Break off the top right locking tab of the kit. (As shown in Fig. A & B)

3. These vehicles can only be ISO mounted if the pocket is on top.

4. Remove the Mustang mounting tabs for these applications.

FIG A

FIG B

Pocket on Top

Remove Tabs

Spacer Nubs

See Notes on

Page 1

See Notes on Page 1

Remove Tabs

Pocket on Bottom

NOTE: See page 4 for 2002-05 Explorer/Mountaineer instructions.

1995-10 Ford Crown Vic

1995-97 Lincoln Continental

1995-98 Lincoln Mark VIII

1995-02 Lincoln Towncar

1995-10 Mercury Grand Marquis

2003-07 Mercury Marauder

NOTES:

001-02 Mercury/Cougar

NOTES:

1995-01 Explorer (all models)

1997-01 Mountaineer

3 8