Operation Manual

JULIET
™
SETUP
Setup your cutter online at
siser.com/websitelink
OR SETUP MANUALLY USING THE
FOLLOWING INSTRUCTIONS
1
Remove all protective packaging from cutter and
accessories, including plastic wrap.
2
Plug the round end of the power cord into the DC
power port on the rear of the machine, then plug the
opposite end into a standard electrical outlet.
Press the power button to turn the cutter on.
3
Get the Leonardo Design Studio
TM
basic
monthly subscription for free with your
cutter purchase
3
Carefully remove 45° blade from
packaging and insert into socket
on blade housing with the
pointed side facing outwards.
4
Twist the upper screw of the blade
housing clockwise to expose less of
the blade, or counterclockwise to
expose more of the blade. The
ideal length of exposed blade is
about a credit card’s width. Once
the blade is properly adjusted,
twist the inner screw to lock in the
blade position.