Operation Manual

WIFI
NETWORK NAME SCAN
PASSWORD
NETWORK NAME
PASSWORD123
IP ADDRESS
xxx.xxx.xxx.200
APPLY
DEFAULT
GENERAL SETTINGS
LED ALERT SLEEP UNIT LANGUAGE
GENERAL SETTINGS
1. 2. 3. 4. 5.
Make general adjustments to your cutter
1. LED — Turn the LED ON/OFF and adjust the brightness
2. Alert — Turn the chime and/or LED ON/OFF that indicates a
completed job
3. Sleep — Set how much time of inactivity will put the cutter to sleep
4. Unit — Choose between metric and imperial measurements
5. Language — Select desired language
WIFI
Set up the cutter’s wireless connection
1. Scan — Searches for available WiFi networks that the cutter can
connect to
2. Eye Button — Shows or hides the password entered
3. IP Address — Manually enter an IP Address
4. Apply — Uses the manually entered IP Address to connect
5. Default — Reverts IP Address back to automatic
1.
2.
3.
8
4.
5.