User's Manual

Ⅴ.Installation diagram
The driving recorder is fixed on the
front windshield
The charger of the driving recorder
is inserted into the cigarette lighter
hole in the car
The charging harness is placed
hidden along the gap of the
interior trim panel
The specific installation steps are as follows:
1. Choose the installation position on the glass and clean it;
2. Install the supporting bracket of the recorder and tear off and install
the suction cup or 3M glue protective film.
3. Install the power cord as as shown.
It is recommended to fix and paste the driving recorder on the front
windshield on the back of the rearview mirror.