Instructions / Assembly

19
ELECTRIC ATTACHMENT CLUTCHES
FIGURE 42
TENSIONING CHAIN (JJ)
LEFT FRONT HOLE
FIGURE 43 VIEW OF BOTTOM
STEP 43: (SEE FIGURE 43)
• Hookthespringfromthepartsbagthroughtheendof
the tensioning chain.
• Hooktheotherendofthespringontothebottomof
theboltandnutwhichsecuretheidlerpulleytothe
upperidlerarm.Holdtheboltheadandassemblea
3/8"hexlocknut(Z)ontothebolt,leavingenough
spaceforthespringtopivotfreelybetweenthetwo
nuts.
• Attacha3/32"hairpincotter(FF)tothechain,placing
itinthefthlinkfromthespring.
CHAIN
(L.H. SIDE)
3/32" HAIR
COTTER PIN (FF)
5TH LINK
LEFT
SIDE
3/8" HEX
LOCK NUT (Z)
SPRING
RIGHT
SIDE
ATTACH
SPRING
HERE
STEP 44: (SEE TABLE 2)
• Twodifferentlengthdrivebeltsareincludedwith
yoursnowthrower.Usethetablebelowtoselect
thecorrectdrivebeltforyourtypetractor.Thepart
numberisprintedontheoutsideofthebelt.
• Setasidethebeltthatisnotforyourtractortoavoid
accidentally using it.
55" BELT (PART #46989)
TRACTOR TYPE DECK SIZE CLUTCH TYPE
56" BELT (PART #48138)
TRACTOR TYPE DECK SIZE CLUTCH TYPE
(LT) Lawn Tractor 48" Electric
(LT) Lawn Tractor 38", 42", 46" Electric
TABLE 2
STEP 41: (SEE FIGURE 41)
• Attachthetwosuspensionarmstotherearofthe
clutch/idlerassemblyusingtwo5/16"x3/4"hexbolts
(C),5/16"washer(Q)and5/16"nylocknuts(Y)for
eacharm.Placethearmsontheoutsideoftheframe
with the notches to the rear.
• Insertatensioningchainthroughtheholeshownand
attachtheendlinktothespringontheloweridlerarm.
FIGURE 41
STEP 42: (SEE FIGURE 42)
• Pacetheextratensioningchain(JJ)throughtheleft
frontholeintheclutch/idlerassemblyandthenturn
theassemblyupsidedown.
5/16" x 3/4"
HEX BOLT (C)
5/16" NYLOCK
NUT (Y)
TENSIONING CHAIN (JJ)
5/16" WASHER (Q)