Operator`s manual

ASSEMBLY

ASSEMBLE BATTERY TO THE MOWER

• Remove Battery Box Cover by removing four Self-

Tapping Screws. (See Fig. 3)

• Remove paper backing from Battery Pad and install

to Engine Mounting Plate centered between "S"

hook slots.

• Assemble two "S" Hooks to the rubber Battery Hold

Down Strap.

• Assemble"S" Hook of Battery Hold Down Strap into

far side slot of Engine Mounting Plate

• Place Battery onto Battery Pad.

• Loop Battery Hold Down Strap over the top of the

Battery and secure into slot and hole on the outside

of the Battery.

• Assemble red Battery Cable to the positive side of

the Battery and secure with one 1/4 x 3/4 Hex Bolt

and one 1/4 Nut with Washer

• Assemble Black Battery Cable to the negative side

of the Battery and secure with one 1/4 x 3/4 Hex

Bolt and one 1/4 Nut with Washer

• Reassemble Battery Box Cover and secure with four

Self-Tapping Screws.

1/4 X 3/4

1/4 NUT

RED BATTERY CABLE

POSITIVE SIDE (+)

BLACK BATTERY CABLE

NEGATIVE SIDE (-)

1/4 X 3/4 HEX BOLT

NUT

BATTERY BOX COVER

SELF-TAPPING SCREW

ENGINE MOUNTING PLATE

BATTERY HOLD

DOWN STRAP

BATTERY PAD

FIG. 3