Product Manual

8
7. Secure the hitch pin to the hitch bracket and tongue
with the hair cotter pin. See gure 4.
FIGURE 4
FIGURE 5
8. Attach the engine base assembly to the tongue using
four 3/8" x 3-1/4" hex bolts, two 3/8" x 1-1/4" hex bolts,
twelve 5/16" at washers and six 3/8" nylock nuts.
Tighten. See gure 5.
HITCH
PIN
HAIR
COTTER
PIN
3/8" x 1-1/4"
HEX BOLT
3/8" x 3-1/4"
HEX BOLT
5/16" WASHER
5/16" WASHER
3/8" NYLOCK NUT
5/16" x 3/4"
SELF THREADING
HEX BOLT
NYLON WASHER
FIGURE 6
9. Assemble the elbow to the impeller housing using
four 5/16" x 3/4" self tapping hex bolts and four nylon
washers. Push while turning to help start the bolts into
the unthreaded holes. Tighten. See gure 6