Instruction Manual
10
16. Place the hose hanger rod into the hose hanger
bracket on the impeller housing assembly. See
gure 11.
17. Loop the 25" tarp strap under the hose. Fasten the
hooks to the hose hanger rod. See gure 11.
FIGURE 11
14. Place a hose clamp onto the end of the hose. Push
the hose onto the hose adapter (nozzle). Tighten the
hose clamp onto the hose and hose adapter. Do not
collapsehoseadapterwhentighteningclamp. See
gure 10.
15. The remaining hose clamp will later be used to fasten
the other end of the hose to the deck adapter.
FIGURE 10
HOSE CLAMP
HOSE ADAPTER
(NOZZLE)
25" TARP
STRAP
HOSE HANGER ROD