Use and Care Manual

8
2. (Figure 12)Holdtheassembledframetubessothat
the center holes face down. Insert the upper frame
tubesdownthroughthestitchedapsinthesidesof
thehopperbag.
3. (Figure 13)Fastenarearframetube(centerholesfacing
up)tothetwolowerframetubesusingtwoplasticplugs
(Z).
LOWER
FRAME
SIDE TUBE
PLASTIC PLUG (Z)
REAR FRAME TUBE
(brace holes on top)
12
13
ENGLISH
UPPER FRAME
TUBE
4. (Figure 14)Placetheassembledframetubesintothe
bottomofthehopperbag.
5. (Figure 14)Attachtheendsofthelowerframetubes
totheinsideoftheupperframetubesusingtwo3/8"
x1/2"clevispins(O)insertedfromtheinside,andtwo
3/32"haircotterpins(N).
14
LOWER FRAME TUBE
HOPPER BAG
BOTTOM
UPPER FRAME TUBE
3/8" x 1/2"
CLEVIS PIN (O)
3/32" HAIR
COTTER PIN (N)
6. (Figure 15)Insertthebagframestrapintothestitched
sleevealongthefrontedgeofthebagbottom.
7. (Figure 15)Assemblethebagframestraptothelower
frametubesusingtwo1/4"x1-1/8"clevispins(P)and
3/32"haircotterpins(N).
1/4" x 1-1/8"
CLEVIS PIN (P)
3/32" HAIR
COTTER PIN (N)
BAG FRAME STRAP
15