Instructions / Assembly

5
STEP 5: (SEE FIGURE 5)
Attach the upper handle tube to the middle handle •
tubes using two carriage bolts (C) and wing knobs
(D). Keep the cord holder above the carriage bolt and
wing knob while assembling.
STEP 6: (SEE FIGURE 6)
Secure the power cord to the upper and lower handle •
tubes using the power cord clips (E).
C
D
E
E
E
FIGURE 5
FIGURE 6
STEP 3: (SEE FIGURE 3)
Turn the Power Rake housing upright and attach the •
long end of each of the middle handle tubes to the
lower handle tube using two carriage bolts (C) and
wing knobs (D).
STEP 4: (SEE FIGURE 4)
Slide the power cord holder (F) onto the right middle •
handle tube.
C
D
LONG END
SHORT END
F
FIGURE 3
FIGURE 4