User Manual

7
5
5
Z
N
N
A
K
13
14
15
Y
Q
Q
L
R
S
F
16
N
I
5
OFF
1
–
2
–
3
–
4
–
5
–
6
–
7
–
8
–
9
–
1
0
–
"5"
ENGLISH
Calibrate the ow control setting. (See gure 17)
• Move the control lever to the "OFF" position.
• Slide the control bracket along the control tube until the
shut-off plate in the bottom of the hopper is closed.
• Lightly tighten the hex nuts that fasten the ow control
bracket to the control tube.
• Set the adjustable stop at "5". Pull the control lever against
the stop and verify that the shut-off plate has opened about
half way.
• If the shut-off plate does not open half way, adjust the
position of the control bracket until the shut-off plate opens
about half way and closes completely.
• Tighten the hex nuts.
17