™ owners manual MANUAL DEL USUARIO NOTICE D’UTILISATION Model No. Modelo No. Modèle No. 45-0410 BROADCAST SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully ESPARCIDOR DE AMPLIO ALCANCE ÉPANDEUR-AÉRATEUR À GRANDE PORTÉE PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operación Segura de la Máquina. • • • • ATTENTION: Lire et suivre attentivement les instructions et consignes de sécurité de cette notice.
RULES FOR SAFE OPERATION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when operating equipment. • • • • • Read the towing vehicle owners manual and towing vehicle safety rules. Know how to operate your tractor before using the broadcast spreader attachment. Read the chemical label instructions and cautions for handling and applying the chemicals purchased for spreading.
1 2 5 4 3 6 CARTON CONTENTS CONTENIDO DE LA CAJA CONTENU DU CARTON 1. 2. 3. 4. 5. 6. 1. 2. 3. 4. 5. 6. 1. Épandeur 2. Câble de commande 3. Tube d’attelage (R.H. - droit) 4. Tube d’attelage (L.H - gauche) 5. Tube de commande de l’attelage 6. Support de fixation de l’attelage (2) Spreader Assembly Control Cable Hitch Tube, R.H. (Right Hand) Hitch Tube, L.H. (Left Hand) Hitch Control Tube Hitch Brackets (2) Conjunto del Esparcidor Cable de Control Tubo de Enganche, R.H.
ASSEMBLY INSTRUCTIONS 4. Assemble the Hitch Brackets to the Hitch Control Tube using two 1/4" x 1-1/4" hex bolts and 1/4" nuts. Tighten. See figure 3. 5. Assemble the hitch pin through the hitch brackets and secure with the 1/8" hair cotter pin. See figure 3. TOOLS REQUIRED FOR ASSEMBLY (2) 7/16" Wrenches REMOVAL OF PARTS FROM CARTON Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify using the illustrations on page 3. 1.
OPERATION APPLICATION TIPS 1. This unit will cover a 4 to 8 foot wide area depending on the material used and the towing speed. 2. To avoid misses or striping, make each pass about 5 feet from the previous one so some overlapping of spread pattern does occur. 3. For easiest application, spread across the shortest edges of lawn first, making two "header" strips for a turning area, and then spreading between the header strips. See figure 6. 4.
REPAIR PARTS FOR MODEL 45-0410 9 26 27 1 10 15 13 28 24 14 16 12 2 8 7 8 7 14 18 21 25 11 27 3 25 8 30 6 5 16 23 22 22 4 20 6 17 19 REF. NO. PART NO. QTY.
NOTES 11
the fastest way to purchase parts www.speedepart.com © 2004 Agri-Fab, Inc. REPAIR PARTS Agri-Fab, Inc. 809 South Hamilton Sullivan, IL. 61951 217-728-8388 www.agri-fab.
