Owner`s manual

ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
(1) Adjustable Wrench
(1) Screwdriver
(1) Pliers
(1) Grease Gun
1 ,
2,
Remove all items from the carton and lay them out
as shown on pages 2 and 3.
Assemble the frame strap and the front frame
angle to the bottom of the two side angles as
shown in figure 1. Use eight 5/16" x 3/4" hex bolts,
5/16" lock washers and 5/16" hex nuts. Do not
tighten yet.
,
Assemble the rear frame angle to the bottom and
the two boom mount brackets to the top of the side
angles as shown in figure 2. Use four 5/16" x 1" hex
bolts, 5/16" lock washers and 5/16" hex nuts. Do not
tighten yet.
J
_°/ BOOM /
5/16" x 1" '_ MOUNT_BRACKET/ i
HEX BOLT I _
REAR ;,-
FRAME
ANGLE
5/16" x 3/4"
HEX BOLT SIDE
ANGLE
5/16" LOCK
WASHER
\
t
5/16" HEX NUT
FRAME
STRAP
\
FIGURE 1
FRONT
FRAME
ANGLE
FIGURE 2
4,
Assemble the tongue to the bottom of the front
frame angle and the frame strap using four 3/8" x
1" carriage bolts, 3/8" lock washers and 3/8" hex
nuts as shown in figure 3. Do not tighten yet.
318" x 1"
CARRIAGE
BOLT
I
FIGURE 3
4