Owners manual

6
ASSEMBLY OF SINGLE CULTIVATOR
Thefollowinginstructionsdescribethetwotypesofdisc
arrangement.Thediscscanalsobemountedfartherapart
byusingtheouterslotsinthetray.
5. Assemblethediscassembliestothetrayusingfour3/8"
x1"carriageboltsand3/8"nylocknuts.Swivelthedisc
assembliessothatthecarriageboltiscenteredinthe
angleadjustmentslot.Tighten. Thisplacesthediscs
atthestandard15degreeangle.Seegures4and5.
ASSEMBLY OF TANDEM CULTIVATORS
(Requirespurchaseofasecondcultivator.)
Thefrontcultivatorshouldbeassembledasshowningure
4.Therearcultivatorshouldbeassembledusingthefollowing
instructions.Notethatthepositionofthetrayanddrawbar
arethereverseofthefrontcultivator.
6. Assemblethediscassembliestotheouterslotsinthe
trayusingfour3/8"x1"carriageboltsand3/8"nylock
nuts.Swivelthediscassembliessothatthecarriagebolt
iscenteredintheangleadjustmentslot.Thisplacesthe
discsatthestandard15degreeangle.Tighten. See
gure6.
FIGURE 6
FIGURE 5
3/8" x 1"
CARRIAGE BOLT
ANGLE
ADJUSTMENT
SLOT
3/8" NYLOCK NUT
CONCAVE (DISHED) SIDE OF DISC FACES OUTWARD.
CONCAVE (DISHED) SIDE OF DISC FACES INWARD.
FIGURE 4
CONCAVE (DISHED) SIDE OF DISC FACES INWARD.
ENGLISH
3/8" x 1"
CARRIAGE BOLT
3/8" NYLOCK NUT
ANGLE
ADJUSTMENT
SLOT
3/8" x 1"
CARRIAGE BOLT
ANGLE
ADJUSTMENT
SLOT
3/8" NYLOCK NUT
THIS END
AT FRONT