User Manual

7
are of correct size and shape for your
selected wheel. Proper wheel flanges
support the wheel thus reducing the
possibility of wheel breakage. Flanges for cut-
off wheels may be different from grinding
wheel flanges.
e. Do not use worn down wheels from larger
power tools. Wheel intended for larger
power tool is not suitable for the higher
speed of a smaller tool and may burst.
ELECTRICAL CONNECTION
The network voltage must conform to the
voltage indicated on the tool name plate.
Under no circumstances should the tool be
used when the power supply cable is damaged.
A damaged cable must be replaced
immediately by an authorized Customer Service
Center. Do not try to repair the damaged cable
yourself. The use of damaged power cables can
lead to an electric shock.
WARNING: Never operate a damaged
machine. Always tag a damaged machine and
take it out of service until repairs can be
made.
SAFETY SYMBOLS
CAUTION: Indicates a potentially hazardous
situation, which, if not avoided may result in
minor or moderate injury. It may also be used to
alert against unsafe practices that may cause
property damage.
DANGER: Indicates an imminently hazardous
situation which if not avoided will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which if not avoided will result in
death or serious injury.
BEFORE USING THIS TOOL
WARNING: Some dust created by the power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-bases paints
• Crystalline silica from bricks, cement
and other masonry products
• Arsenic and chromium from chemically
• treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals, work in a well-
ventilated area and work with approved safety
equipment such as dust masks specially designed
to filter out microscopic particles.
WARNING: To reduce the risk of mistakes that
could cause serious or permanent injury, do not
plug the machine in until the following steps
have been completed.
• Learn the use and function of the ON-OFF
switch.
• Review and understand all Safety
• Instructions and Operating Procedures in
this manual.
• Review the maintenance methods for this
tool.
REDUCE THE RISK OF DANGEROUS
ENVIRONMENT
• Use the machine in a dry or indoor place
protected from rain.
• Place the machine so that neither the user
nor bystanders are forced to stand in line
with Machine. Thrown debris could injure
people in its path.