Quick Start Guide

4
4. Place Nano-SIM or Micro SD card in outside position.
5. Make sure that the Nano-SIM and Micro SD card metal contact
parts are facing down and that the cut corner aligned with tray in
the correct position as per the diagram shown above.
SIM Tips:
1. The AGM A10 does not support 2 SIM cards data services working
together. When inserting 2 SIM cards, you can only choose one of
the 2 SIM cards to use 4G services. The AGM A10 supports dual
SIM dual standby but single pass. This means that you cannot use
both SIM cards for calls or data services simultaneously.
2. Nano-SIM and Micro SD card socket can only be used for either
Nano-SIM or Micro SD card. Place the Nano-SIM vertically or
place Micro SD card horizontally.
3. Do not insert or remove the tray when your phone is powered on.
4. Make sure the cards are correctly aligned and the tray is level
before inserting it into the phone.
5. SIM card adapter. A cut SIM card or any other non-standard cards
are not allowed. Those non-standard cards may not be recognized
by the phone and can damage the tray.
Micro SD Tips:
1. Do not remove the Micro SD card while using the phone, as the
card may be damaged. AGM will not be held responsible for any
subsequent data loss or card damage resulting from this action.
2. Power off the phone before installing or removing the Micro SD
card.
3. Please note that AGM does not provide Micro SD cards.
BATTERY AND CHARGING
Note: The AGM A10 battery is not removable
Standby time:
1. The AGM A10 standby time is dependent on different working
environments.
2. A Phone receiving a weak network signal and operating at low
temperature will have a shortened standby time.
3. Screen brightness, system settings, games, music, video, location
services, camera, Bluetooth, Wi-Fi and applications consume the
most battery power.
Charging the phone:
1. Plug the USB Type-C cable into the phone.
2. Connect the USB power cable to the charging power adapter.
Some version AGM A10 does not come along with a power
adapter