Users Manual

AGM Global Vision16
1. Hold button to show the menu.
2. Select
menu item.
3. Press
button to select the offset. The offset refers to the moving length
of cursor.
4. Press
and to select the moving direction.
5. Press
to move the cursor to the position of dead pixel.
6. Hold
to correct the dead pixel.
2.3 CLIENT SOFTWARE INTRODUCTION
We recommend using T-Vision (V5.4.12 and below) software. Install the client
software on your mobile phone first, and then connect your phone to the hotspot
of the monocular. Refer to chapter 2.2.4 for details of hotspot connection.
NOTE:
The device password is set by user at first activation. If the password was lost
or forgotten, it can be reset. To make a reset, provide the following action:
1. When the monocular is turned on, hold the button
for three seconds to
activate the OSD menu.
2. Move the cursor to
and press the button to restore all parameters to
default settings.
1. Open the APP and connect the phone or pad with the device.