Users Manual

AGM Global Vision14
When the hot spot mark is enabled, the mark displays in the spot of the
highest temperature. When the scene changes, the mark moves.
2.2.4 NETWORK CONFIGURATION
Connect your phone to the Wi-Fi hotspot of the monocular, you can configure
the parameters and realize functions of the device.
1. Hold
button to show the menu.
2. Select
menu item to enable Wi-Fi hotspot function.
3. Turn on the WLAN and connect to the Wi-Fi hotspot.
- Hotspot Name: Wlan-IPTS Serial No.
- Hotspot Password: Serial No.
4. Search the client software on App Store (iOS System) or Google Play
TM
(Android System) to download and install the app.
5. Open the APP and connect your phone with the device. You can view the
interface of monocular on your phone.
2.2.5 DISTANCE MEASUREMENT
The device can detect the distance between the target and the observation
position.
NOTE:
When measuring the distance, keep the hand and the position steady.
Otherwise, the accuracy may be affected.
1. Hold
button to show the menu.
2. Select
menu item and press button to enter the Distance
Measurement mode.
3. Press
button to go to the target setting interface.
1) Press
or to select the target from Wolf (0.8m), Bear (3.0m),
Deer (1.2m), and Custom (1.8m).
2) Set the target and press
to confirm.
4. Align the center of top mark with the edge of target top. Press
.
The cursor blinks on the top edge of the target.
5. Align the center of bottom mark with the edge of target bottom. Press
.
The left top of the image displays the distance measurement result and the
height of the target.
FIGURE 2-7. DISTANCE MEASUREMENT