Users Manual

AGM Global Vision10
2.1.4 POWER ON AND OFF
Power On
Hold the POWER button
for 5 seconds to power on the device. An image will
appear on the display.
Refer to the figure below for the main view of the monocular display.
Power Off
When the device is turned on, hold
button for 2 seconds to power off the
device.
2.1.5 SLEEP MODE
In the view mode, press the button. After a few seconds, the display will turn
off. Press the button again to exit the Sleep Mode.
2.1.6 THERMAL VIEW OBSERVATION
1. Power on the monocular.
2. Hold the monocular and make sure the eyepiece covers your eye.
3. Adjust the diopter adjustment knob until the OSD text or image is clear.
4. Point the monocular towards the target of the view.
5. Set palette, brightness, contrast, scene mode and FFC (Flat Field Correction),
to display the best image effect.
HOT SPOT BATTERY
DIGITAL ZOOM STORAGE
FIGURE 2-3. THE DISPLAY MAIN VIEW
FIGURE 2-4. DIOPTER ADJUSTMENT KNOB
DIOPTER
ADJUSTMENT
KNOB