TAIPAN TM10-256 TM15-256 THERMAL IMAGING MONOCULAR USER MANUAL
© 2020 AGM Global Vision, LLC. All rights reserved. This documentation is subject to change without notice. No parts of this manual, in whole or in part, may be copied, photocopied, translated, or transmitted by any electronic medium or in machine-readable form without the prior written permission of AGM Global Vision, LLC. If you have questions that are not covered in this manual, or need service, contact AGM Global Vision customer support for additional information prior to returning a product.
FCC INFORMATION Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. FCC compliance: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
LIST OF CONTENTS TITLE PAGE Safety Summary 5 1. GENERAL INFORMATION 6 1.1 System Description 6 1.2 Key Features 7 1.3 Standard Components 7 2. OPERATING INSTRUCTIONS 8 2.1. Basic Operations 8 2.2 Main Function 12 2.3 Client Software Introduction 17 3. MAINTENANCE 19 3.1 Maintenance 19 3.2 Troubleshooting 20 4. WARRANTY INFORMATION 21 4.1 Warranty Information and Registration 21 5. SPECIFICATIONS 23 5.
SAFETY SUMMARY • • • • Read and follow all instructions Read all warnings Only use the attachments/accessories specified by the manufacturer All service must be provided by the manufacturer WARNING: This product contains natural rubber latex, which may cause potentially fatal allergic reactions! If you are allergic to latex, it is important that you strictly avoid exposure to products that contain it.
1 GENERAL INFORMATION 1.1 SYSTEM DESCRIPTION The Taipan TM-256 handheld observational thermal monocular is equipped with a 256×192 infrared detector and a 720×540 LCOS display. It supports functions of observation, highest temperature target tracking, distance measurement, Wi-Fi hotspot, and so on. The high-sensitivity built-in thermal detector provides you with clear view even in total darkness.
1.2 KEY FEATURES • 256×192 resolution, 12 μm, high sensitivity detector • Adaptive AGC, DDE, 3D DNR • 720×540 resolution LCOS display • Distance measurement • Highest temperature tracking • Built-in memory module supports video recording and snapshot capturing • Wi-Fi hotspot • Built-in rechargeable Lithium battery • Up to 8 hours continuous running • Limited 3-year warranty 1.3 STANDARD COMPONENTS The standard components are shown in Figure 1-2 and listed in Table 1-2. The ITEM NO.
2 OPERATING INSTRUCTIONS 2.1. BASIC OPERATIONS 2.1.1 UNPACKING The following steps must be completed prior to each mission. 1. Open the carrying case, remove the monocular, and verify that all components are included. 2. Inspect the monocular for any obvious evidence of damage to the optical surfaces, body, eyecup, operation buttons, etc. Ensure that all optical surfaces are clean and ready for use. Clean all optical surfaces with a lens tissue. 2.1.
1. Lift the USB cover. 2. Plug in the USB cable and charge the device. 3. Plug the power adapter to the power source. TABLE 2-1. BATTERY LED INDICATOR STATUS INDICATORS FUNCTIONS Flashing Red & Green Error occurred. Solid Red Battery is properly charged. Solid Green Battery is fully charged. Off Battery is not charged. 2.1.3 CONTROL BUTTONS The Taipan controls are shown in Figures 2-2 and are defined in Tables 2-2.
2.1.4 POWER ON AND OFF Power On Hold the POWER button for 5 seconds to power on the device. An image will appear on the display. Refer to the figure below for the main view of the monocular display. DIGITAL ZOOM HOT SPOT STORAGE BATTERY FIGURE 2-3. THE DISPLAY MAIN VIEW Power Off When the device is turned on, hold button for 2 seconds. The SHUTDOWN window will appear on the display. Press or button to change selected position from CANCEL to OK.
4. Set palette, brightness, contrast, scene mode and FFC (Flat Field Correction), to display the best image effect. 2.1.7 PALETTE SETTINGS You can select different palettes to display the same scene in different effects. Press button to switch palettes. TABLE 2-3. PALETTE SETTINGS PALETTE DESCRIPTION WHITE HOT BLACK HOT FUSION RED HOT 2.1.8 The hot part is white-colored in view. The higher the temperature is, the lighter the color is. The hot part is black-colored in view.
2.1.10 FILE EXPORT 1. Before connecting the thermal monocular to a computer, please make sure that the Wi-Fi function of the monocular is disabled. 2. Connect the thermal monocular to your PC with USB cable and open the detected disk. 3. Enter DCIM>100EZVIZ to view the videos and snapshots. - Select and copy the videos to PC and play the file with the player. - Select and copy the snapshots to PC and view the files. 4. Disconnect the device from your PC.
TABLE 2-4. MENU FUNCTION MENU ITEM SYMBOL OPTION ON OSD OFF FUNCTION Press to display or hide the OSD information. BRIGHTNESS 5 Levels of brightness Press to adjust the brightness. CONTRAST 5 Levels of contrast Press to adjust the contrast. Recognition SCENE MODE Jungle OFF NETWORK Hotspot Auto / Manual / External 0.8m/1.2m/ 1.8m/3.0m Target Height FFC MEASURE OFF HOT TRACKING ON DPC CVBS --- CVBS OFF CVBS ON Press to switch between the Recognition mode and Jungle mode.
2.2.2 OSD 1. Hold button to go to the menu. 2. Select / menu item and press button to switch the OSD mode. When OSD (On-Screen Display) is on the information of Wi-Fi hotspot activation, digital zoom, storage memory status, and battery status displays in top right corner of viewfinder. 2.2.3 BRIGHTNESS ADJUSTMENT 1. Hold button to go to the menu. 2. Select Brightness menu item and press button to adjust the brightness.
NOTE: When the power is less than 15%, the Wi-Fi hotspot function will be turned off automatically. 2.2.7 FLAT FIELD CORRECTION Flat Field Correction (FFC) function can correct nonuniformity of display. 1. Hold 2. Select button to show the menu. menu item and press button to switch the FFC mode. Auto: The monocular performs FFC automatically when switching on or rebooting the camera. Manual: Hold button in live view to correct the nonuniformity of display.
NOTE: Go to distance measurement interface, and press previous measuring target. to view the result of the 2.2.9 HOT TRACKING The device can detect the highest temperature spot in the scene and mark it on display. 1. Hold button to show the menu. / and press button to enable/disable hot spot mark 2. Select (marking the spot of highest temperature). When the hot spot mark is enabled, the mark displays in the spot of the highest temperature. When the scene changes, the mark moves. 2.2.
2.2.12 LANGUAGE SETTING You can select different languages of user interface. 1. Hold button to show the menu. Language menu item and press button to select the language. 2. Select The following languages are supported: English, Russian, German, Czech, French, Spanish, Danish, Norwegian, Swedish, Finnish, Hungarian, Italian, Polish, Portuguese, Romanian, Slovak. 3. Hold to save settings and exit. 2.3 CLIENT SOFTWARE INTRODUCTION We recommend using T-Vision (V5.4.12 and below) software.
2. If the device is inactivated, set the password and activate it. If the device is activated, enter the password to add it to app. Device [ Taipan TM10-256 ] 3. When the device is added, the live view can be seen. You can view the interface of the monocular on the software. User can change such image parameters as brightness, contrast, zoom, palettes directly via phone or pad as well as record video on phone/pad memory.
3 MAINTENANCE 3.1 MAINTENANCE 3.1.1 CLEANING PROCEDURES 1. Gently brush off any dirt from the body of the device using a clean, soft cloth. 2. Moisten the cloth with fresh water and gently wipe down the external surfaces (except lenses). 3. Dry any wet surfaces (except lenses) using another dry, clean, soft cloth. 4. Using a lens brush, carefully remove all loose dirt from the lenses. 5. Dampen a cotton swab with ethanol and slowly, gently wipe down the lenses.
7. Turn on the device. After a while, the firmware update process will start automatically. During the update, the screen will display the inscription “Upgrading ...”. The update process will be completed when the inscription “Upgrading ...” goes out. Repeat steps 5-7 for each updating file. 8. Turn off the device and disconnect it from your PC. 3.1.5 RESTORE DEVICE 1. Hold button to show the menu of device. and press 2. Select the prompt. button to restore the device to defaults according to 3.
4 WARRANTY INFORMATION 4.1 WARRANTY INFORMATION AND REGISTRATION 4.1.1 WARRANTY INFORMATION This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of three (3) years from the date of purchase.
obligation toward any third party of legal entity outside AGM Global Vision and the Customer; AGM Global Vision’s obligations under this Agreement extend solely to the Customer. AGM Global Vision’s liability hereunder for damages, regardless of the form or action, shall not exceed the fees or other charges paid to AGM Global Vision by the customer or customer’s dealer.
5 SPECIFICATIONS 5.1 SPECIFICATIONS TAIPAN TM10-256 Detector Type Resolution 256×192 Refresh Rate 25 Hz Response Waveband Lens (Focal Length) Aperture Field of View (H×V) Magnification 8 μm to 14 μm 10 mm 15 mm F1.0 F1.0 18° × 13.55° 11.69° × 8.78° 1.0× - 8× Digital Zoom 1.42× - 11.36× 1×, 2×, 4×, 8× Monitor 720×540, 0.
AGM Global Vision, LLC MAIN OFFICE 173 West Main Street PO Box 962 Springerville, AZ 85938 USA Tel. +1.928.333.4300 info@agmglobalvision.com www.agmglobalvision.com EUROPEAN OFFICE Andrey Lyapchev #7 Sofia, P.C. 1756 Bulgaria Tel. +35.988.412.5573 info@agmglobalvision.eu www.agmglobalvision.eu AGMglobalvision.
