User's Manual

RATTLER TS USER MANUAL 21
2.2.13 HOT TRACKING
The device can detect the highest temperature spot in the scene and mark it
on display.
1. Hold
button to show the menu.
2. Select
/ and press button to enable/disable hot spot mark
(marking the spot of highest temperature).
When the hot spot mark is enabled, the
mark displays in the spot of the
highest temperature. When the scene changes, the mark moves.
2.2.14 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which are not performed as expected.
Before you start switch the palette to White Hot mode.
1. Hold
button to show the menu.
2. Select
DPC menu item and press button.
3. Press
, , and buttons to move the cursor to the position
of dead pixel.
6. Hold
button to correct the dead pixel.
2.2.15 CVBS OUTPUT
You can view the video on CVBS monitor, to get a better and clear image, more
convenient to check the detail.
1. Connect the USB-CVBS cable to USB port of thermal riflescope and to
monitor’s CVBS port.
NOTE:
USB-CVBS cable need to be purchase separately.
NOTE:
CVBS Output function doesn’t support hot plug, so please connect the cable
before power on.
2. Hold
button to show the menu.
3. Select CVBS menu item and press
button to turn on or turn off the CVBS
video output.
2.2.16 LANGUAGE SETTING
You can select different languages of user interface.
1. Hold
button to show the menu.
2. Select
Language menu item and press button to select the language.
The following languages are supported: English, Russian, German, Czech,
French, Spanish, Danish, Norwegian, Swedish, Finnish, Hungarian, Italian,
Polish, Portuguese, Romanian, Slovak, Spanish.
3. Hold
button to save settings and exit.