User's Manual

AGM Global Vision20
2.2.11 FLAT FIELD CORRECTION
Flat Field Correction (FFC) function can correct non-uniformity of display.
1. Hold
button to show the menu.
2. Select
FFC menu item and press button to switch the FFC mode.
Auto: The riflescope performs FFC automatically when switching on or
rebooting the camera.
Manual: Hold
button in live view to correct the non-uniformity of display.
External: Cover the lens cap, then hold
button in live view to correct the
non-uniformity of display.
3. Hold
button to confirm the setting and exit.
2.2.12 DISTANCE MEASUREMENT
The device can detect the distance between the target and the observation
position.
NOTE:
When measuring the distance, keep the hand and the position steady.
Otherwise, the accuracy may be affected.
1. Hold
button to show the menu.
2. Select
menu item and press button to enter the Distance Measurement
mode.
3. Press
button to go to the target setting interface.
1) Press
or to select the target from Wolf (0.8m), Bear (3.0m),
Deer (1.2m), and Custom (1.8m). Each target preset can be modified from
0.1 to 9.9m.
2) Set the target and press
button to confirm.
4. Align the center of top mark with the edge of target top. Press
button.
The cursor blinks on the top edge of the target.
5. Align the center of bottom mark with the edge of target bottom. Press
.
The left top of the image displays the distance measurement result and the
height of the target.
NOTE:
Go to distance measurement interface, and press
button to view the result
of the previous measuring target.
FIGURE 2-9. DISTANCE MEASUREMENT