User's Manual

AGM Global Vision12
TABLE 2-1. BUTTON FUNCTIONS
BUTTON FUNCTIONS
POWER
Press: Sleep Mode/Wake Up Device
Hold: Power On/Off
MENU / SELECT
Press: Enable/Disable OSD
Hold: Menu Operation
MODE / LEFT
Press: Switch Palettes
Hold: Enable/Disable PIP
CAPTURE / UP
Press: Capture
Hold: Start/Stop Record Video
SHUTTER / RIGHT Press: Correct Non-uniformity of Display
CALIBRATION / DOWN
Press with Capture button together to
launch the Image Calibration menu.
2.1.6 POWER ON AND OFF
Power On
Hold the POWER button
for 4 seconds to power on the device. An image will
appear on the display.
Refer to the figure below for the main view of the clip-on display.
Power Off
When the device is turned on, hold
button for 4 seconds to power off the
device.
In the “Auto Power Off” menu you can set the time for the automatic shutdown
of the device as required (OFF / 30 min / 45 min).
2.1.7 SLEEP MODE
In the view mode, press the button. After a few seconds, the display will turn
off. Press the button again to exit the Sleep Mode.
HOT SPOT BATTERY
MAGNIFICATION STORAGE
FIGURE 2-4. THE DISPLAY MAIN VIEW