User's Manual

AGM Global Vision22
1. Hold button to show the menu.
2. Select
menu and press button to enter the Time Sync.
3. Press
or buttons to select the time format, time or date. Press
button to switch and confirm.
2.2.20 ON-SCREEN DISPLAY
You can display the information of Wi-Fi hotspot activation, current
magnification, storage memory status, battery status, time and date in top of
viewfinder.
1. Hold
button to show the menu.
2. Select
OSD menu item and press button to enable or disable OSD.
3. Hold
button to exit.
2.2.21 DISTANCE MEASUREMENT
You can detect the distance between the target and the observation position.
NOTE:
When measuring the distance, keep your hand and the position steady.
Otherwise, the accuracy may be affected.
1. Hold
button to show the menu.
2. Select
menu item and press button to enter the Distance Measurement
mode.
3. Press
button to go to the target setting interface.
1) Press
or to select the target from Wolf (0.8 m), Bear (3.0 m), Deer
(1.2 m), and Custom (1.8 m). Each target preset can be modified from 0.1
to 9.9 m.
2) Set the target and press
button to confirm.
4. Align the center of top mark with the edge of target top. Press
button.
The cursor blinks on the top edge of the target.
5. Align the center of bottom mark with the edge of target bottom. Press
.
The left top of the image displays the distance measurement result and the
height of the target.
NOTE:
Go to distance measurement interface, and press
button to view the result
of the previous measuring target.
FIGURE 2-10. DISTANCE MEASUREMENT