User's Manual

AGM Global Vision20
2.2.12 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which have not performed as expected.
Before you start switch the palette to White Hot mode.
1. Hold
button to show the menu.
2. Select
DPC menu item and press button.
3. Press
, , and buttons to move the cursor to the position of dead
pixel.
4. Hold
button to correct the dead pixel.
2.2.13 BURN PREVENTION
You can protect the thermal scope under the sun or other bright light with high
temperature that could leave a damage to the riflescope. When you point the
device directly at the heat, the shutter will be released and cover the sensor to
protect it. It resumes once the environment turns to normal.
1. Hold
button to show the menu.
2. Select
Burn Prevention menu item and press button to turn on or turn
off the Burn Prevention function.
3. Hold
button to exit.
2.2.14 VIEW DEVICE INFORMATION
1. Hold button to show the menu of device.
2. Select
Version menu item and press button. You can view the device
information such as firmware version, and serial number.
2.2.15 RESTORE DEVICE
You can reset the settings of device.
1. Hold
button to show the menu of device.
2. Select
Restore menu item and press button to restore the device to
defaults according to the prompt.
2.2.16 AUTO POWER OFF
You can set the time for the automatic shutdown of the device as required.
1. Hold
button to show the menu of device.
2. Select
Auto Power Off menu item and press button to select OFF, 30
min or 45 min.
2.2.17 LANGUAGE SETTING
You can select different languages of user interface.
1. Hold
button to show the menu.
2. Select
Language menu item and press button to select the language.