User's Manual

AGM Global Vision18
NOTE:
When Reticle is enabled, the PIP view is the detail of crosshair.
When Reticle is not enabled, the PIP view is the detail of central part.
3. Press
button to activate or deactivate PIP mode.
4. Hold
button to exit.
If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio
exceeds 4, the PIP does not zoom.
You can quickly enable or disable the PIP function by holding down the
button.
2.2.8 RETICLE AND BORESIGHTING
Enable the reticle to aim at the target. Hold button in the view mode for 4
seconds, to display or hide the reticle.
1. Hold
button to show the menu.
2. Select
Reticle menu item. A reticle shows in the center of the view.
3. Press
or buttons to select one of 5 reticle type. Then press button
to confirm.
NOTE:
The scale intervals of the Reticle 4 changes synchronously under the current
digital zoom. The value of one scale interval of the Reticle 4 is 6.75 MOA.
You can boresight the scope by moving the reticle on screen:
1. In Reticle menu press
, , and buttons to move the reticle position.
The coordinate shows the current position of the reticle.
2. Hold
button to save and exit.
FIGURE 2-7. RETICLE PATTERNS
RETICLE 1 RETICLE 2 6)8-'0) RETICLE 4 RETICLE 5
FIGURE 2-8. BORESIGHT CORRECTION
Cursor Type : Reticle 1