User's Manual

Digital Night Vision Scope User Manual
8
Figure 3-2 Adjust Focus
Note
When focusing, do not touch the surface of lens to avoid smearing the lens.
3.3 Adjust Brightness
In menu mode, rotate the wheel to select and press the wheel to adjust brightness.
3.4 Adjust Contrast
In menu mode, rotate the wheel to select and press the wheel to adjust image contrast.
3.5 Set Smart IR
Image overexposure may occur in too bright environment. The smart IR function helps to adjust
the overexposed images, and it can improve the image effect in night mode by adjusting the
brightness of the supplement light.
In menu mode, rotate the wheel to select and press the wheel to enable this function.
3.6 Set Display Mode
You can select different display modes in different scenes.
Hold in live view interface to switch display modes. Day, night, defog, and auto are
selectable. The current mode is displayed on the right top of the interface.