Quick Start Guide

10
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss.
Laws and Regulations
● Use of the product must be in strict compliance with the local electrical
safety regulations.
Transportation
● Keep the device in original or similar packaging while transporting it.
● Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper.
● Transportation without the original wrapper may result in damage on
the device and the company shall not take any responsibilities.
● Do not drop the product or subject it to physical shock. Keep the device
away from magnetic interference.
Power Supply
● The input voltage for the device should meet the Limited Power Source
(5 VDC, 2 A) according to the IEC61010-1 standard. Please refer to
technical specifications for detailed information.
● Make sure the plug is properly connected to the power socket.
● DO NOT connect multiple devices to one power adapter, to avoid
over-heating or fire hazards caused by overload.
● The power source should meet limited power source or PS2
requirements according to IEC 60950-1 OR ICE 62368-1 standard.
Battery
● Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. The battery type
is 18650 with the protection board, and the battery size should be
23 mm × 67 mm. The rated voltage and capacity are 3.6 VDC/3.35 Ah
(12.18 Wh). Dispose of used batteries in conformance with the